For ancillary services and industrial operations
Optimised for challenging applications (temperature range -25 to + 50°C)
Designed for a life cycle of 30 years
100% depth of discharge and 35% higher energy density
Can be used up to a rated voltage of 1,300 V DC
Black start-capable
High level of resilience against failure of master/slave systems
Remote maintenance possible
Three different container sizes available (20, 40 or 45 ft)
Extremely safe cell technology
Our battery storage system can be optimally adapted to suit every application. For optimisation of self-consumption or shave peak loads, connected to the utility grid or used off-grid for optimisation of diesel hybrid systems, in deserts or polar regions, the TESVOLT TPS-E offers a technical storage system solution to suit every application. Its advanced, cost-optimised design ensures unbeatable cost efficiency without compromising on quality and performance. It is extremely robust and well suited to the hardest of tasks. High-quality battery cells from the automotive industry and innovative technologies such as the DynamiX Battery Optimizer make the TESVOLT TPS-E storage system one of the most durable products on the market.
As a TESVOLT partner you will find all information about our products and offers in the Partner Portal. If you have any questions about this product or you are looking for an installer in your area - we are here for you!
The TPS-E storage system is optimised for particularly demanding operations in commercial enterprises. The investment costs for the system and the price per kWh stored remain low thanks to the system’s exceptional cost-efficiency.
Self-Consumption Optimisation
Use more energy from renewable sources and minimise feed-in.
Back-up Power
Storage system immediately takes over the power supply in the event of a power outage.
Physical Peak Shaving
Shave consumption peaks and minimise demand rate costs. The grid connection must be able to supply all loads.
Off-Grid
TESVOLT’s solution for simple off-grid systems which solely consist of a photovoltaic installation and battery system.
PV-Diesel-Hybrid-Optimisation
TESVOLT solutions optionally adjust the power grid and balance generation and consumption peaks to keep the diesel generator in optimal operation, minimizing diesel costs
Micro-Grid
Supplying a small power grid with or without connection to a public utility grid. A micro-grid consists of a battery storage system in addition to other generator systems and controllable consumers.
Direct Marketer Interface
The PV direct marketer transmits the control signals to the PV installation via the EMS.
Time of Use
Time-dependent use of energy features and services.
Multi-Use
Simultaneous use of two applications (SCO & PS, ToU & PS, ToU & SCO)
Zero Feed-In
VDE FNN-certified fulfilment of grid requirements for not feeding electricity into the utility grid.
Ancillary Services
Remote control of active and reactive power.
Generation Control
Consumption optimisation via active connection/disconnection of generators depending on the energy generated in grid operation.
Load Control
Consumption optimisation via active connection/disconnection of consumers depending on the energy generated.
Whether you’re looking for webinars or certification training, technical design with our TESVOLT project planner, storage system planning, quote generation and ordering with the TESVOLT product configurator or a direct link to your contact – you can find all our tools and offerings relating to the TPS E in our Partner Portal. Just sign up once and benefit from our comprehensive services as an installer.
C-Rate | 1C | |
Cell | Lithium NMC prismatic (Samsung SDI) | |
Cell–balancing | DynamiX Battery Optimizer | |
Expected cycles at 100 % DoD | 70 % EoL | 23 °C ± 5°C 1C/1C | 6000 | |
Expected cycles at 100 % DoD | 70 % EoL | 23 °C ± 5°C 0,5 C/0,5C | 8000 | |
Cycle efficiency (battery, DC/DC) | up to 98% | |
Operating voltage | up to 1300 V DC | |
Communication interface | CAN 2.0, Modbus TCP/IP | |
Certificates/norms (currently in preparation) | Cell | IEC 62619, UL 1642, UN 38.3 |
Product | CE, UN 38.3, IEC 62619, IEC 61000-6-2/4, UL1973, BattG 2006/66/EG | |
Warranty | 10-year capacity warranty, 5-year system warranty | |
Recycling | free battery take-back program from TESVOLT in Germany | |
Protection class | IP 20 | |
Battery specification as per DIN EN 62620:2015 | IMP47/175/127/[14S]E/-20+60/90 | |
Size | 20 ft | 40 ft | 45 ft |
Dimensions (L x W x H) | 6,06 x 2,44 x 2,90 m | 12,12 x 2,44 x 2,90 m | 13,72 x 2,44 x 2,90 m |
Energy (max.) | 1,9 MWh | 4,2 MWh | 5,0 MWh |
Number of storage systems | up to 19 | up to 42 | up to 48 |
External operating temperature range | -20 to 45 °C | ||
Altitude of installation site | < 2000 m above sea level (other specifi cations on request) | ||
Protection class | IP 54 | ||
Special equipment (optional) |
Fire extinguisher, CSC certification, |