TPS flex Lithium Storage System

  • Optimised for use with the SMA Sunny Tripower Storage System 60
  • Especially cost-efficient for megawatt applications
  • Container module effectively protects the storage system from external influences
  • Flexible configuration and expansion possible even years down the road
  • Built to last 30 years and 8,000 full cycles
  • 1C charging speed
  • The utmost in cell technology safety

The all-rounder

Whether you want to increase self-consumption or shave peak loads, go on- or off-grid or optimise diesel hybrid systems, whether you’re in the desert or the Arctic–the TESVOLT TPS flex represents a technical storage solution for any application.

Its advanced, cost-optimised design makes for unbeatable efficiency – without sacrificing quality or performance. It is extremely robust and therefore well-suited to the hardest tasks.

Thanks to cutting-edge prismatic lithium battery cells from Samsung SDI and innovative technologies, such as the Active Battery Optimizer, our TESVOLT TPS flex storage system is one of the most durable products on the market.

Areas of application

The TPS system has a fully modular design, from the battery modules to the container. That makes it adaptable, with a long lifespan for high efficiency.

The TPS system has a fully modular design, from the battery modules to the container. That makes it adaptable, with a long lifespan for high efficiency.

Self-Consumption Optimisation

Use more energy from renewable sources and minimise feed-in.

Peak shaving

Shave consumption peaks and minimise demand rate costs.

Time of use

Time-dependent use of functions.

Multi-use

Simultaneous use of two applications: Either LSK & EVO, or LSK & Time of Use, or EVO and Time of Use.

Our TPS storage systems not only offer flexible configuration options at the moment of purchase – thanks to the innovative Active Battery Optimizer technology, the capacity can also be expanded years later.

Ancillary services

Remote control of active and reactive power.

PV-Diesel-Hybrid optimisation

TESVOLT solutions have the option of making the utility grid available while counterbalancing production and consumption peaks. This keeps diesel generators operating as efficiently as possible to minimise diesel costs.

Forecast-based battery charging

Depending on the weather forecast, curtailment losses from photovoltaic installations are avoided and self-consumption is optimised.

Direct marketer interface

Gives access to direct marketers for the purposes of marketing electricity from renewable energy sources.

1. DC distribution

2. Battery racks

3. Air conditioning

System Setup

Modular principle

The TPS flex is available in a total of six variants. Except for the smallest system, the capacity of all other variants can be increased by 4.8 kWh per battery system with the help of an expansion set. Two different container sizes (10 ft and 20 ft) are available.

Typ Capacity Power Container Battery systems NumberTPS
TPS flex 10 ft TS HV 70 / 60 72 kWh 60 kW 10 ft 1 1
TPS flex 10 ft TS HV 140 / 60 144 kWh 60 kW 10 ft 2 1
TPS flex 10 ft TS HV 140 / 120 144 kWh 120 kW 10 ft 2 2
TPS flex 20 ft TS HV 140 / 60 144 kWh 60 kW 20 ft 2 1
TPS flex 20 ft TS HV 210 / 180 216 kWh 180 kW 20 ft 3 3
TPS flex 20 ft TS HV 280 / 120 288 kWh 120 kW 20 ft 4 2

Technical data TESVOLT TS HV 70

Energy for each TS HV 70 battery system (15 battery modules) 72 kWh
C-rate 1C
Cell Lithium NMC prismatic (Samsung SDI)
Max. charging/discharging current 94A
Cell balancing Active Battery Optimizer
Cycles @ 100% DoD | 70% EoL | 23 °C +/-5 °C 1C/1C 6 000
Cycles @ 100% DoD | 70% EoL | 23 °C +/-5 °C 0,5C/0,5C 8 000
Effi ciency (battery) up to 98%
Selfconsumption (standby) 5 Watt (excluding battery inverter)
Operating voltage 666 bis 930 V DC
Operating temperature -10 bis 50°C
Humidity 0 bis 85% (nicht kondensierend)
Altitude of installation site < 2 000 m above sea level
Dimensions (HxWxD) 10 ft Container 2900 x 2440 x 3000 mm
Dimensions (HxWxD) 20 ft Container 2900 x 2440 x 6100 mm
Certificates Cell IEC 62619, UL 1642, UN 38.3
Product CE, UN 38.3, IEC 62619, IEC 61000-6-1/2/3/4, BattG 2006/66/EG
Guarantee 10-year performance guarantee, 5-year system guarantee
Recycling TESVOLT offers free return of batteries from Germany
Protection class IP 35

TECHNICAL SPECIFICATIONS SMA STPS 60

Nominal charging power (AC) 60 kVA
Nominal discharge power (AC) 75 kVA
DC voltage range 575 to 1000 V
Dimensions (H x W x D) 740 × 570 × 306 mm
Max. efficiency 98,8 %
Self-consumption (standby) < 3W
Operating temperature -25 to 60 °C
Weight 77 kg
Protection class IP 65 | NEMA 3R
Communication Modbus TCP/IP
Topology transformerless
Guarantee 5 years
Storage assistant
Our storage assistant will help you determine the right TESVOLT storage system, and the ideal size and features to meet your needs.
Storage assistant

Specification text


select all  |   Download (.txt)

Downloads

Battery Disposal

Are you interested in the TPS Flex? Do you have any questions?